Utigoflex specializes in manufacturing high-performance steam hoses

Constructed with an EPDM inner tube and EPDM cover, these hoses are designed for the conveyance of saturated steam and hot water. The standard representative color is red, customized color is available.

The outer cover is perforated with small pin holes. This essential feature allows trapped air and moisture to escape (breathing), preventing blistering and delamination of the hose cover when exposed to high heat.

Temperature Rating: Withstands temperatures up to 210°C (410°F).

Reinforcement: Available with two types of reinforcement to suit different pressure requirements:

Textile Braided Reinforcement: Safety factor of 4:1.

Steel Wire Braided Reinforcement: Safety factor of 10:1.

Critical Usage Precautions from Utigoflex:

1. Pressure and Temperature Limits:Do not exceed the maximum recommended working pressure and temperature (210°C) for the specific hose type. Remember that pressure ratings decrease as temperature increases.
2. Correct Installation:Ensure the hose is correctly installed and is not twisted. It must not be stretched or subjected to excessive tensile stress.
3. Proper Venting:Ensure the perforated (pin-holed) outer cover remains unobstructed and is never wrapped with tape or covered with paint. Blocking these vents will prevent the escape of moisture and steam, leading to cover damage and potential hose failure.
4. Allow to Cool Before Handling:Allow the hose to cool down completely before moving, storing, or performing any maintenance on it.
5. Avoid excess bending or flexing of the hose near the coupling.Straight line operation is preferred. If bends are necessary as part of operation, spring guards may help.